Digital power amplifier with 2 x 100 W at 8 Ω and high efficiency up to 92%

Audiophile-grade, very warm to tube sound with substantial volume, clear surround and pleasing detail.

The amplifier's power is sufficient to power even demanding loudspeakers, and the distortion exhibits very low values across the entire frequency range without depending on the current load.Thanks to its low output impedance and minimal noise, the Amp Box DS2 meets the highest sonic standards for spatiality and microdynamics.

The four-layer circuit board allows the shortest possible signal paths to be used, thus guaranteeing high sound quality despite its compact size.The Amp Box DS2 delights listeners with a fresh, energetic and smooth sound that can only be heard in much more expensive components.

The Amp Box DS2 power amplifier finds its application in many home applications where superior sound, small size and high performance are required.As an additional upgrade, you can use the Power Box DS2 Amp for separate power supply to further optimize sound quality.

The sandwich chassis made of aluminium and metal is not only highly aesthetic and robust, but also protects the amplifier from vibration and electromagnetic interference.Silver or black finishes are available, and alternatively, an elegant optional extra can be selected, complete with wooden side panels made of walnut or eucalyptus wood.

ADVANTAGES

• High-quality screw-in speaker terminals
• Elegant anti-resonance all-metal chassis
• Multi-layer circuit board for shortest signal paths
• Superior Class D audiophile quality circuitry
• Very low distortion and noise levels even under high load
• RCA input with line level signal
• By-pass output for looping
• Switchable Trigger input and output allow connection to Pro-Ject Box Design audio systems

LINKS

• Review in set with Pre Box DS2 Analogue - Hifi-Voice (EN)

TECHNICAL SPECIFICATIONS

• Performance:2 × 100 WATTS (8 Ω), 2 × 140 WATTS (4 Ω)

• Gain: 31 dB

• Input impedance: 10 kΩ

• Channel separation: > 40 dB at 20 kHz

• Frequency response:10 Hz - 50 kHz (+0 dB, -3 dB)

• Signal to noise ratio: >-90 dB (IEC-A)

• THD (total harmony distortion): < 0. 1% ( at 90 W)

• Input:2 × RCA (gold-plated, isolated)

• Loop Output:2 x RCA (gold-plated, isolated)

• Input sensitivity:550 mV (100W, 4 Ω)

• Speaker connectors:4 mm banana plugs, forks or bare wire

• Trigger:12 V DC, 2.5 mm jack

• Power supply:48 V / 2.5 A DC; 100 - 240 V, 50 / 60 Hz

• Dimensions:240 x 194 x 72 mm / 240 x 69 x 194 (with wooden bonnets)

• HmoCapacity:1,860 g (without power supply) 2,130 g (with wooden bosses)